Call us: +91 80 22239610

PRODUCTS
product_header
OUR PRODUCTS
Nylon
PTFE
Acrylic
Delrin
Polypropylene
PVC
Polyethylene
Polycarbonate
Carbon Fibre
ABS
HIPS
PU Foam
Graphite
Hylam
Glass epoxy
Polyurethane
Tapes
Industrial Adhesives
Specialty lubricants
Asbestos
Composites
Rubber
Noryl
Polyester
Polysulfone
PEEK
Ultem
Torlon
PTFE

PTFE is a fluorocarbon-based polymer. It offers high chemical resistance, low and high temperature capability, resistance to weathering, low friction, electrical and thermal insulation, and ultrahigh purity combining with self-lubricating "slipperiness". PTFE’s mechanical properties are low compared to other plastics, but its properties remain at a useful level over a wide temperature range of -73°C to 204°C. . PTFE is very dense and cannot be melt processed - it must be compressed and sintered to form useful shapes.

FILLED GRADES

PTFE's mechanical properties can be enhanced by adding fillers such as glass fibres, carbon, graphite, molybdenum disulphide, and bronze. Generally, filled PTFE's maintain their excellent chemical and high temperature characteristics, while fillers improve mechanical strength, stability, and wear resistance.

  • Non-melting, non-toxic, non-stick, non-wetting, non-flammable, self-extinguishing
  • Lowest coefficient of friction, resistance to radiation
  • Tremendous chemical resistance
  • Food grade, biologically inert
  • High weather resistance, non-ageing
  • Low thermal expansion
  • Operationally stable over a wide range of cryogenic & elevated temperatures
  • High dielectric strength
  • Good resistance to UV radiation

O-rings, valve seats, pump & valve linings, diaphragms, packing rings, seal covers, bushes, bearings, insulators, piston rings, pipe joints, filters, guides, non-stick moulds, gaskets, bellows, beakers, magnetic stirrers.

Fertilizer plants, thermal power plants, corrosive chemicals, drugs & pharmaceuticals, textile, paper & printing, electronic & space research, pneumatic & hydraulic equipments, processed food, automobile, laboratories, railways, aeronautics, space research.

Round rods, sheets, tubing, bush, balls.

Round rods: 6 mm – 150 mm dia. x 1 mtr. long; 155 mm – 400 mm x 1 ft long
Sheet: 0.1mm – 3.5mm thick x 300mm to 1000mm wide x continuous roll; 1.5mm – 100mm thick x 300mm sq. to 1000mm sq
Tubing: various sizes with wall thickness of 0.8 mm, 1.0 mm, 1.5mm
Bush: OD 12.5 mm x ID 6mm to OD 300 mm x ID 275mm x 100 mm long
Balls: 6 mm dia to 50 mm dia

teflon
teflon
teflon
teflon