Noryl® modified PPO (Polyphenylene Oxide - Styrene) is
an alloy of PPO and styrene.It is considered an ideal
engineering plastic choice due to excellent mechanical,
thermal and electrical properties combined with good
hydrolytic stability over a wide range of temperature and
humidity. Noryl is widely used for electrical and structural
components since it has excellent insulating properties,
flame resistance and self-extinguishing properties (UL – 94)
V – 0 @ 0.240” thickness and dimensional stability over a
wide range of service temperatures. It is often selected for
fluid handling applications since it has low moisture
absorption and excellent strength and stiffness. Because of
its alloy matrix composition, it is also one of the few
non-metallic materials which can be readily electroplated
(after an electroless plating surface has been applied using
a selective etching process).It is easy to fabricate, paint,
and glue. It may be used continuously at temperatures in
excess of 110°C.
Electrical insulators and components, aircraft
instrumentation, shafts, gear wheels, spacer, pump, valve and
fittings, water softener valves, water pump components,
surgical instruments, vaporizer and scrubber parts, plated
and vacuum metallized parts, manifolds, surgical instruments,
scientific & analytical instrument controls.
Automotive, aircraft and aerospace, electrical and
electronics, food processing, telecommunications, pumps &
Round rods, square rods, sheets, tubing.
Partial resistant to petroleum products
Sensitive to Organic solvents, Alcohol, Acetone, Ethyl acetate etc.
Round rods: 5 – 200 mm Plates: 5 – 50 mm thickness Tubes: on request